Xinxiang Tongxin Machinery Co., Ltd.
Xinxiang Tongxin Machinery Co., Ltd. Achievement customer, achievement employee, achievement enterprise
Add to Cart
20 Years Production Experience Ro-Type Screen Machine Calcium Carbonate
Introduction
Slap screen (flapper standard vibration sieve machine) is also called slap type vibrating screen is one of the commonly used laboratory detection instrument structure is mainly composed of a base, sieve and transmission mechanism etc..
With the advantages of compact structure, small occupation area, mechanism of flexible operation, stable performance, its good working environment, using a single power supply, easy to use.
Slap screen (flapper standard vibration sieve machine) can be equipped with special fixture, can clamp 200 standard screen, and can be clamped Phi 75, Phi 100 sieve, clamping is convenient and flexible, firm clamping, and can automatically stop.
Structure
| No. | Name |
| 1 | Hammer |
| 2 | Mandril |
| 3 | Eccentric wheel |
| 4 | Motor |
| 5 | Motor gear |
| 6 | Synchronous belt |
| 7 | Cabinets |
| 8 | Bottom slider |
| 9 | Tray |
Characteristics
1. The structure is more compact, the weight of the body is reduced.
2. The product is more durable, light, convenient.
3. Maintenance is more simple, parts are easy to repair and available.
4. High screening efficiency, at the same time with reciprocating vibration and top hammer vibration two kinds of motion.
5. Will not plug the screen surface, feeding fast, screening thoroughly.
Apply in Industry
Widely used in food, medicine, chemicals, abrasives, pigments, mining, metallurgy, geology, ceramics, and national defense industry, scientific research units, laboratories, production.
And to screen, grade, analysis particle size , analysis debris content of solid, powder, slurry feed materials such as examination. Especially for the production of diamond and other superhard materials screening.
Working Principle
Motor drive the gear to the spindle axis through the timing belt, the spindle axis rotate as the required rotational speed after the gear changing the speed. The spindle axis driven the eccentric to make the skateboard reciprocate, thus driving the two groups sieves which the apertures order from large to small and installed on the slide tray of the skateboard to shake right and left.
At the same time, the spindle axis drive the mandril gear to rotate, after changing speed the mandril gear hit the mandril by cams, the mandril make the hammer hit the cover of the test sieve up and down, making the material on the sieves shake back and forth and up and down. so that the material particles whose size is less than sieve mesh fall into the lower sieves.
Through screening layer by layer, leaving the same size material on each sieve.
Technical Parameters
| Name | Unit | Number |
| Usable Sieve Diameter | mm | 75, 100, 150, 200, 250, 300, 400 |
| Putting Sieve Layers | layer | 1-8 |
| Swing Frequency | Times-min | 290±5 |
| Slapping Frequency | Times/min | 156±3 |
| Reciprocating Trip | mm | 25 |
| Slapping Height | mm | 38±6 |
| Power | kw | 0.37 |
| Voltage | v | 380, 220 |
| Size | mm | H685*L400*W400 |
| Total Weight | kg | 180 |
Our Service
1. We offer 24-hour online consulting service;
2. 20 years production experience to ensure quality;
3. We have thorough data to ensure the quality;
4. We provide detailed instruction an product information;
5. We provide 12 months quality warranty.
If you want to get more information of product, please contact us!